Just what is the best method to sand a wood floor?

After years of website traffic, the timber floorings are shedding their luster. To revitalize them, sanding and also re-opening could be necessary. Right here’s the best ways to sand and also varnish a timber floor.

Cut the film of paint in between the plinth and the wall surface with a energy blade. Area a small board against the wall surface so as not to damage it. Remove the skirting board with a nail bar or screwdriver versus the board. Spread out the plinth at the location of each nail. Number skirting boards as you eliminate them to help with reinstallation. Remove the nails.

To sand a floor over its entire surface, utilize a drum sander. Begin utilizing # 80 paper. Starting from the end of the work surface, push the sander in the direction of the flooring battens to around 6 “from the wall. Elevate the drum while maintaining the sander moving. Return to your starting factor as well as begin the next section midway along the width of the very first area. When the surface has actually been completely sanded, change the # 80 paper with # 120. Repeat the process making use of # 150 paper to remove the marks left by the previous sanding. It is necessary to work in a well aerated space. If needed, you can rent out some tools or hire experts. Or else, be sure to follow the directions,

Utilize a boundary sander, and also the very same sanding paper numbers in the order recommended in the previous step, to sand along the wall. Scratch hard-to-reach areas, such as radiators, with a paint scrape. At these exact same areas, sand manually.

Start by using the varnish on the edge of the room using a brush that is suitable for the product utilized. Then utilize an applicator suggested by the maker as well as spread the varnish over the rest of the floor. Let the time advised by sablage de plancher .

To finish the job, sand the surface making use of a finishing sander with a fine-grained abrasive pad.

Leave a Reply

Your email address will not be published. Required fields are marked *